Dune Low Cut Zip Side Lace Up Safety Boot Brown - Rifft Safety

Tools and Guides

STS Shigematsu Filter Selection Calculator
Answer a few questions to find the right filter for your Shigematsu Respirator!

Click here to go to the calculator

Catalogues and Brochures
Click on any of the interactive PDFs below to view or download:
Rifft Safety Brochure
Shigematsu Respirator Catalogue
CleanAir Respirator Catalogue
Spill Kit Catalogue
Services

Training Services (Hazardous Substances and First Aid)

Competent Person Regulation 4.5 Training

Under the regulations, a PCBU must ensure that every worker who uses, handles, manufactures, or stores a hazardous substance (including hazardous waste) is trained before carrying out or supervising work involving those substances.
This training is provided through public face-to-face courses, onsite courses (minimum numbers apply), or as an online self-paced eLearning course.
Click here to learn more and book a course today ⟶

Emergency Spill Response Training

Spills in your workplace must be managed and cleaned up safely. The knowledge to do so is important for warehouse staff, drivers, loaders, managers and other people who work with or store chemicals.
This course provides you with training and instruction on how to deal with small and medium-sized spills. Available as a 50 minute onsite course or online training completed at your own pace.
Click here to learn more and book a course today ⟶

Approved Filler Online Training

This training forms the theoretical component of the Approved Filler Certification process. After completing the course you will be issued a certificate that can be used to prove your theoretical knowledge on Approved Fillers.
Please note we do not issue or sign Certificates. Only WorkSafe Approved Compliance Certifiers can do so.
Click here to learn more and register today ⟶

Certified Handler Online Training

This training forms the theoretical component of the Certified Handler Certification process. After completing the course you will be issued a certificate that can be used to prove your theoretical knowledge on Certified Handlers.
Please note we do not issue or sign Certificates. Only WorkSafe Approved Compliance Certifiers can do so.
Click here to learn more and register today ⟶

Dangerous Goods D Endorsement Training

This course is for anyone who handles or transports any dangerous goods, e.g. fuel and chemicals, by road in New Zealand and needs a D Endorsement. To get the endorsement, you need to complete this course and take your course certificate provided by IVS Training to a licensing agent (VTNZ, AA).
The endorsement expires every 5 years and you must re-sit an assessment and have it endorsed on your license
Click here to learn more and book a course today ⟶

Dangerous Goods Handling for Transport (Land, Sea, Air)

Dangerous goods have special transport requirements to eliminate or minimise the risk of injuring people or damaging property and the environment.
If you manufacture, pack, consign, or transport dangerous goods, it is crucial to understand these requirements. This is especially important in New Zealand, where many goods need to travel by multiple modes of transport, such as land transport combined with either air or sea transport when moving between the North and South Islands.
Click here to learn more and book a course today ⟶

First Aid Training

Stay prepared for emergencies with our First Aid training courses. From core essentials to refreshers, these courses will cover everything from minor injuries to life-threatening emergencies, ensuring you can provide effective aid until help arrives.
Update your first aid knowledge and skills, keeping you current with the latest guidelines and practices.
Click here to learn more and book a course today ⟶

Management Services

Respirator Fit Testing

Respiratory protective equipment (RPE) is a type of personal protective equipment (PPE) that protects people from breathing in substances hazardous to health.
This test is crucial because a proper fit is necessary to minimize the risk of inhaling hazardous substances, such as dust, gases, vapours, or particles, that may be present in the work environment fits appropriately and is fit for purpose.
Click here to learn more and book today ⟶

HSWA Compliant Hazardous Area Atmosphere Zone Site Plans

Site plans help identify and mitigate the risks associated with the hazardous substances you have on site to ensure the safety of workers, the environment, and the surrounding community.
The requirements for a compliant site plan are documented in accordance with the Compliance Certifier in reference to AS/NZS 60079.10.1:2009, Health and Safety at Work (Hazardous Substances) Regulations 2017.
Click here to learn more and place an enquiry today ⟶

Traffic Management and Emergency Evacuation Plans

Traffic Management Plans are designed to ensure the smooth flow of vehicle and pedestrian movements onsite, effectively managing traffic risks and minimising vehicle-related accidents.
These plans clearly define the roles and responsibilities of traffic managers and drivers, as well as daily and emergency traffic control procedures.
Click here to learn more and place an enquiry today ⟶

Spill Kit and Emergency Shower Audit (Site Review)

Entrust us with a thorough evaluation of your spill kits and emergency showers. One of our specialists will conduct an on-site inspection to assess the condition and compliance of your equipment.
Click here to learn more and book a consultation today ⟶
Promotions
Register
Log In
0800 474 338
hello@rifft.co.nz

No products have been added.

Click here to start browsing our collection.

Dune Low Cut Zip Side Lace Up Safety Boot Brown

Dune Low Cut Zip Side Lace Up Safety Boot Brown

Dune Low Cut Zip Side Lace Up Safety Boot Brown

Dune Low Cut Zip Side Lace Up Safety Boot Brown

Dune Low Cut Zip Side Lace Up Safety Boot Brown

Dune Low Cut Zip Side Lace Up Safety Boot Brown

Dune Low Cut Zip Side Lace Up Safety Boot Brown

Description
Additional information

Description

Tested and compliant to ASTM F2412-18 (18kV) EH – Electrical Hazard Resistance

Breathable, synthetic and leather upper with ergonomic zip and lace combination

Nitrile rubber sole with best SRC slip rating

300C Outsole rating

EVA midsole: lighter, more flexible and better impact absorption

Wide fitting last

Innovative self venting footbed base – SDVS (Self Dispersing Venting System) and breathable lining, combine to enhance heat dispersion and reduce moisture

Moulded footbed compound, with athletic arch support, provides compression resistant cushioning and improved support

Additional toe guard helps extend the life of the boots

Non-marking sole

Steel toe cap

Bison_Footwear_Size Guide_A3

BISON DUNEBK Data Sheet V3.0

Additional information

Size	10, 11, 12, 13, 5, 6, 7, 8, 9

Dune Low Cut Zip Side Lace Up Safety Boot Brown

Product Code (SKU): Select a variation below to view its SKU

✔

All variations are in stock

These sexy (even brown can be sexy) looking safety boots are breathable with the best SRC slip rating.

Moulded footbed compound with athletic arch support provides compression support resistant cushioning and improved support.

Steel toe capped so if you accidentally kick a steel pole, the pole will feel it not you!

Adding to all that, these boots are tested and compliant to ASTM F2412-18, Electrical Hazard Resistance.

(Apart from sizes listed, available in sizes 4 and 14, but I was too lazy to add them)

Variation	Price (excl GST)	Price (incl GST)
7	$169.00	$194.35
8	$169.00	$194.35
9	$169.00	$194.35
10	$169.00	$194.35
11	$169.00	$194.35
12	$169.00	$194.35
13	$169.00	$194.35
5	$169.00	$194.35
6	$169.00	$194.35

Description
Additional information

Description

Tested and compliant to ASTM F2412-18 (18kV) EH – Electrical Hazard Resistance

Breathable, synthetic and leather upper with ergonomic zip and lace combination

Nitrile rubber sole with best SRC slip rating

300C Outsole rating

EVA midsole: lighter, more flexible and better impact absorption

Wide fitting last

Innovative self venting footbed base – SDVS (Self Dispersing Venting System) and breathable lining, combine to enhance heat dispersion and reduce moisture

Moulded footbed compound, with athletic arch support, provides compression resistant cushioning and improved support

Additional toe guard helps extend the life of the boots

Non-marking sole

Steel toe cap

Bison_Footwear_Size Guide_A3

BISON DUNEBK Data Sheet V3.0

Additional information

Size	10, 11, 12, 13, 5, 6, 7, 8, 9

Not sure what you need?
Click here to call us today!
0800 474 338

Let's keep in touch

Be the first to hear about the latest products and industry insight

Product Categories

Training Services

Competent Person Regulation 4.5 Training

Under the regulations, a PCBU must ensure that every worker who uses, handles, manufactures, or stores a hazardous substance (including hazardous waste) is trained before carrying out or supervising work involving those substances.

This training is provided through public face-to-face courses, onsite courses (minimum numbers apply), or as an online self-paced eLearning course.

Click here to learn more and book a course today ⟶

Emergency Spill Response Training

Spills in your workplace must be managed and cleaned up safely. The knowledge to do so is important for warehouse staff, drivers, loaders, managers and other people who work with or store chemicals.

This course provides you with training and instruction on how to deal with small and medium-sized spills. Available as a 50 minute onsite course or online training completed at your own pace.

Click here to learn more and book a course today ⟶

Approved Filler Online Training

This training forms the theoretical component of the Approved Filler Certification process. After completing the course you will be issued a certificate that can be used to prove your theoretical knowledge on Approved Fillers.

Please note we do not issue or sign Certificates. Only WorkSafe Approved Compliance Certifiers can do so.

Click here to learn more and register today ⟶

Certified Handler Online Training

This training forms the theoretical component of the Certified Handler Certification process. After completing the course you will be issued a certificate that can be used to prove your theoretical knowledge on Certified Handlers.

Please note we do not issue or sign Certificates. Only WorkSafe Approved Compliance Certifiers can do so.

Click here to learn more and register today ⟶

Dangerous Goods D Endorsement Training

This course is for anyone who handles or transports any dangerous goods, e.g. fuel and chemicals, by road in New Zealand and needs a D Endorsement. To get the endorsement, you need to complete this course and take your course certificate provided by IVS Training to a licensing agent (VTNZ, AA).

The endorsement expires every 5 years and you must re-sit an assessment and have it endorsed on your license

Click here to learn more and book a course today ⟶

Dangerous Goods Handling for Transport (Land, Sea, Air)

Dangerous goods have special transport requirements to eliminate or minimise the risk of injuring people or damaging property and the environment.

If you manufacture, pack, consign, or transport dangerous goods, it is crucial to understand these requirements. This is especially important in New Zealand, where many goods need to travel by multiple modes of transport, such as land transport combined with either air or sea transport when moving between the North and South Islands.

Click here to learn more and book a course today ⟶

First Aid Training

Stay prepared for emergencies with our First Aid training courses. From core essentials to refreshers, these courses will cover everything from minor injuries to life-threatening emergencies, ensuring you can provide effective aid until help arrives.

Update your first aid knowledge and skills, keeping you current with the latest guidelines and practices.

Click here to learn more and book a course today ⟶

Management Services

Respirator Fit Testing

Respiratory protective equipment (RPE) is a type of personal protective equipment (PPE) that protects people from breathing in substances hazardous to health.

This test is crucial because a proper fit is necessary to minimize the risk of inhaling hazardous substances, such as dust, gases, vapours, or particles, that may be present in the work environment fits appropriately and is fit for purpose.

Click here to learn more and book today ⟶

HSWA Compliant Hazardous Area Atmosphere Zone Site Plans

Site plans help identify and mitigate the risks associated with the hazardous substances you have on site to ensure the safety of workers, the environment, and the surrounding community.

The requirements for a compliant site plan are documented in accordance with the Compliance Certifier in reference to AS/NZS 60079.10.1:2009, Health and Safety at Work (Hazardous Substances) Regulations 2017.

Click here to learn more and place an enquiry today ⟶

Traffic Management and Emergency Evacuation Plans

Traffic Management Plans are designed to ensure the smooth flow of vehicle and pedestrian movements onsite, effectively managing traffic risks and minimising vehicle-related accidents.

These plans clearly define the roles and responsibilities of traffic managers and drivers, as well as daily and emergency traffic control procedures.

Click here to learn more and place an enquiry today ⟶

Spill Kit and Emergency Shower Audit (Site Review)

Entrust us with a thorough evaluation of your spill kits and emergency showers. One of our specialists will conduct an on-site inspection to assess the condition and compliance of your equipment.

Click here to learn more and book a consultation today ⟶

Customer Service