What Does HAZCHEM Signage Mean? A New Zealand Guide to Site Signs and Emergency Action Codes

Short answer: HAZCHEM signage is an early-warning system for a workplace or site where hazardous substances are stored or used. It tells people that hazardous substances are present, the general type of hazard, and the immediate response action to take in an emergency.

The sign is not a complete risk assessment or emergency plan. In New Zealand, read it together with the substance label, safety data sheet (SDS), site inventory and emergency response plan. If there is an incident, keep away from the hazard, call 111 when appropriate, and follow instructions from trained site personnel and emergency services.

Where should HAZCHEM signs be displayed?

The exact requirements depend on the substances, quantities and location. WorkSafe New Zealand says signs may be required when hazardous substances exceed specified quantities, and its hazardous substances calculator can help determine whether signs are required.

As a practical guide, look for signs in three places:

  • At property and building entrances: where hazardous substances are in a building, signs are required at every vehicle and pedestrian entrance to the building and property.
  • At a room or compartment entrance: where hazardous substances are kept in a dedicated room or compartment, the sign should be at each entrance.
  • Beside outdoor storage: where hazardous substances are stored outdoors, the sign should be immediately next to the storage area.

Signs should be durable, in plain English, easy to understand and clearly visible. WorkSafe says the information should be legible from at least 10 metres in changing conditions such as rain or poor light. Keep signs clean, readable and unobscured, and update them when the type, class or quantity of substances changes.

For classes 2, 3, 4, 5, 6 and 8, New Zealand workplace signage requirements generally use the word HAZCHEM. Class 1 substances have separate signage requirements, including the word EXPLOSIVES. Special rules can also apply to situations such as fumigants, vertebrate toxic agents and transit depots.

How to read a HAZCHEM site sign

The entrance sign

The sign at the entrance is intended to give people enough information to approach the site safely. It may show the word HAZCHEM, hazard diamonds or other recognised pictograms, the general hazard types, emergency instructions and contact information.

The entrance sign is deliberately high-level. It helps emergency services and other people recognise the risk before they get close; it does not replace the detailed information in the SDS or emergency response plan.

The building or storage-area sign

Closer to the substance, the sign normally becomes more specific. It may add instructions such as:

  • no smoking or naked flames;
  • keep ignition sources away;
  • protect drains and contain spills; and
  • call 111 and contact the site or specialist adviser in an emergency.

These instructions are site- and substance-dependent. Always follow the wording on the current sign and the site emergency procedures rather than relying on a generic example.

Hazard diamonds and pictograms

Hazard diamonds and pictograms give a rapid visual indication of the type of danger. For example, a flammable-liquid diamond signals a fire risk, a skull-and-crossbones pictogram signals acute toxicity, and a corrosive pictogram signals a corrosive hazard.

The pictogram is a recognition aid, not a complete handling instruction. Check the product label and SDS for the substance-specific controls, incompatibilities, first aid, firefighting and accidental-release information.

What is an Emergency Action Code?

An Emergency Action Code (EAC) is a short code used to communicate key response information to emergency responders. The reference guide supplied for this article uses the HAZCHEM format: a number followed by a letter, with an optional E.

In the example system shown in that guide:

  • 1 indicates coarse spray;
  • 2 indicates fine spray or fog;
  • 3 indicates foam; and
  • 4 indicates dry agent. The guide warns that water must not be allowed to contact the substance when dry agent is specified.

The letter adds information about reaction risk, protective equipment and spill control. Depending on the letter, the response may involve liquid-tight chemical protective clothing with breathing apparatus, breathing apparatus and fire kit, dilution, or containment. These are specialist response instructions, not directions for an untrained person to fight a fire or clean up a spill.

The optional E identifies a public safety hazard. The supplied guide says people nearby may need to be warned to stay indoors with doors and windows closed, while evacuation may also need to be considered. The actual protective action must be determined by emergency services and the site emergency plan.

What does the HAZCHEM code 2YE mean?

The supplied guide uses 2YE as a worked example. Read it from left to right:

  1. 2 – fine spray or fog: this is the firefighting medium indicated by the first character in the example system.
  2. Y – violent reaction risk and specialist protection: the substance may react violently or explosively. The response information shown in the guide calls for breathing apparatus and full fire kit, with spillages contained.
  3. E – public safety hazard: people beyond the immediate incident area may need warning, shelter or evacuation instructions.

In other words, 2YE is a rapid message for trained responders: use the indicated firefighting approach, expect a serious reaction risk, use specialist protective equipment, prevent the spill from reaching drains or waterways, and consider the wider public-safety impact.

Do not treat 2YE as permission to approach the substance. If you are not a trained and authorised responder, move away, prevent others from entering the area if you can do so safely, call 111 and provide the information shown on the sign or placard.

What do the UN number and substance name tell you?

A placard may include more than the Emergency Action Code. It can also show:

  • a UN number, which is a four-digit identifier for a dangerous substance or entry;
  • the proper shipping name or common name of the substance;
  • hazard diamonds or transport placards; and
  • an emergency or specialist contact number.

The supplied example shows UN 1075 alongside the name “Liquefied Petroleum Gases”. Treat the number and name on the actual placard as the source for that substance; never assume that a similar-looking container has the same contents or response code.

What should you do when you see a HAZCHEM sign during an incident?

If you see smoke, a leak, a spill, a damaged container or another emergency near hazardous substances:

  1. Stop and keep a safe distance. Do not enter the storage area or approach a leaking container to read the sign.
  2. Keep away from flames, sparks and other ignition sources, if you can do so without putting yourself at risk.
  3. Raise the alarm and call 111 when there is an immediate threat to people, property or the environment.
  4. Tell responders what the sign or placard says, including hazard pictograms, the EAC, UN number and emergency contact details, if you can observe them safely.
  5. Follow the site emergency response plan and instructions from emergency services. Do not attempt firefighting, spill control or rescue unless you are trained, equipped and authorised to do so.

HAZCHEM signs, labels, SDSs and emergency plans: what is the difference?

These documents work together, but they are not interchangeable:

  • HAZCHEM signage warns people before they get too close and gives the first emergency-response information.
  • Container labels identify the product and communicate its hazard classification and warnings.
  • Safety data sheets provide detailed information about hazards, handling, storage, PPE, first aid, firefighting and accidental release response.
  • The emergency response plan explains how the particular workplace will respond, who is responsible, what equipment is available and how the plan is tested.

WorkSafe says workplaces that need an emergency response plan must address reasonably foreseeable emergencies, make information about hazardous properties available and specify any special training needed. A sign is therefore one visible part of a broader hazardous-substances management system.

A practical New Zealand HAZCHEM signage checklist

Use this as a review prompt, not as a substitute for a compliance assessment:

  • Confirm whether the quantities and classifications at the workplace trigger signage requirements.
  • Use the correct HAZCHEM or EXPLOSIVES wording for the substances and situation.
  • Show the correct hazard pictograms or hazard statements.
  • State the immediate emergency response action in plain English.
  • Place signs at the required vehicle, pedestrian, building, room and outdoor-storage points.
  • Make sure the sign can be read in poor weather and is not hidden, covered or blocked by an open gate or door.
  • Review signs whenever the substance type, class or quantity changes.
  • Keep the current inventory, labels, SDSs and emergency response plan consistent with the sign.

Frequently asked questions

Is HAZCHEM the same as a hazard diamond?

No. HAZCHEM is the warning and response-sign system used at relevant hazardous-substance locations. Hazard diamonds and pictograms communicate the general hazard class or type. A sign may include both, but they answer different questions.

Does every hazardous-substance site need a HAZCHEM sign?

Not necessarily. New Zealand signage requirements depend on the substances, quantities and circumstances. Use WorkSafe’s hazardous substances calculator and check the applicable regulations. Even where a sign is not mandatory, WorkSafe says signage is good practice because it warns workers, visitors and emergency services.

Can a worker use the EAC to choose firefighting equipment?

Not unless they are trained, equipped and authorised for that response. An EAC is a rapid communication tool for emergency responders. Workers should follow their training, site emergency procedures and emergency-services instructions.

What does the E in an Emergency Action Code mean?

In the EAC system illustrated in the supplied guide, E indicates a public safety hazard. People nearby may need to be warned, sheltered indoors or evacuated, depending on the incident and the direction of emergency services.

Where can I check the current New Zealand requirements?

Start with WorkSafe New Zealand’s guidance on hazardous-substance signs, the Health and Safety at Work (Hazardous Substances) Regulations 2017, and WorkSafe guidance on emergency plans. Check the exact current requirements for your substances, quantities and site.

Sources and scope

This explanatory article adapts the supplied Understanding HAZCHEM Site Signage and Emergency Action Codes reference sheet prepared by Dalton International Ltd in 2020. It has been cross-checked against current WorkSafe New Zealand guidance and the New Zealand hazardous-substances regulations. The source sheet’s EAC example is included to help readers recognise the information on a placard; it is not a substitute for the current sign, SDS, emergency response plan or instructions from Fire and Emergency New Zealand.

Not sure what you need?
Click here to call us today!
0800 474 338

Let's keep in touch

Be the first to hear about the latest products and industry insight

Mailing List signup

🎄🎅 Merry Christmas and Happy New Year! 🎉✨

Summer Santa is here, and even he needs a break! 🌞🎅 We'll be closed from 20th Dec to 7th Jan 2026 to soak up the sun and recharge.

Online orders will still be accepted however any orders placed after the 18th Dec may not be dispatched until 8th Jan 2026.

Thank you for your support, and see you in the New Year! 🌟